Grundfos Unilift KP Stainless Steel Submersible Pump – Winery Sump & Cellar Drainage
Grundfos Unilift KP Stainless Steel Submersible Pump – Winery Sump & Cellar Drainage
Compact stainless steel drainage pumps for NZ wineries, cellars and vineyards
The Grundfos Unilift KP is a compact, fully stainless steel submersible pump for clean water and slightly dirty (grey) wastewater. It is small enough to carry from job to job and tough enough for the wet, busy conditions of a New Zealand winery. Use it as a portable pump or fix it in place as a permanent sump pump.
Choose your model from the variant selector:
- KP150-A1 (automatic) – Includes a float switch, so it starts and stops as the water level rises and falls. Good for unattended sumps, barrel hall floor drains and cellar door plant rooms.
- KP250-M1 (manual) – Higher flow and lift, with no float switch. Suited to attended jobs like emptying tanks, bunds and pits, transferring clean water, and flood clean-up. It can also be paired with your own external level control for automatic operation.
Where they're used in the wine industry
- Barrel hall and cellar floor sumps
- Winery wash-down and vintage clean-up water
- Small bunds, drainage pits and trenches
- Emptying water troughs, dams and header tanks (clean water)
- Flood and stormwater removal around winery buildings and vineyard sheds
- Cellar door, bottling room and plant room drainage
- Irrigation water transfer in vineyards
Suitable Liquids
Clean, non-aggressive water and grey wastewater. Not intended for pumping wine, juice, must, lees or thick winery solids. Ask us about food-grade winery transfer pumps for those jobs.
- Family owned and operated
- 50 years local experience
- Secure checkout
Features
Features
Full stainless steel construction, including pump housing and impeller, for corrosion resistance in humid winery conditions
Float switch on the KP150-A1 for hands-free automatic operation
Manual KP250-M1 for portable use, with higher flow and lift
Handles solids up to 10 mm, suitable for slightly dirty wash-down water
Semi-open impeller to help prevent fibres and debris jamming the pump
Wet rotor design that tolerates short periods of dry running
Built-in thermal overload protection guards the motor against overheating
IP68 rated, suitable for submerged operation
1¼" threaded outlet for simple hose or pipe connection
Lightweight and compact, easy to carry and store
Single phase 230 V, 50 Hz, so it runs from a standard NZ power supply
Grundfos build quality with low maintenance
Float switch on the KP150-A1 for hands-free automatic operation
Manual KP250-M1 for portable use, with higher flow and lift
Handles solids up to 10 mm, suitable for slightly dirty wash-down water
Semi-open impeller to help prevent fibres and debris jamming the pump
Wet rotor design that tolerates short periods of dry running
Built-in thermal overload protection guards the motor against overheating
IP68 rated, suitable for submerged operation
1¼" threaded outlet for simple hose or pipe connection
Lightweight and compact, easy to carry and store
Single phase 230 V, 50 Hz, so it runs from a standard NZ power supply
Grundfos build quality with low maintenance
